DYNACORD CMS 600-3 Owner's Manual download pdf (Page 26)

CMS

4 DIGITAL AUDIO INTERFACE

The USB 2.0-Port of the CMS serves as digital audio inter-

face for the connection of a PC or Apple Macintosh

(Mac). The DIGITAL AUDIO INTERFACE can be used as in-

put or output device at the same time. When using a PC/

Mac with USB 2.0 interface up to four channels can be

transmitted simultaneously in any direction. When using

a PC/Mac with USB 1.1 interface up to two channels can

be transmitted simultaneously in any direction.

HINT: Using high grade USB 2.0 cables is recom-

mended for optimal signal quality.

CAUTION: We can accept no responsibility for any

loss of the data you record using this prod-

uct onto other MIDI equipment in your sys-

tem or onto storage devices such as hard

disk.

4.1 Installing the USB driver

Before connecting the CMS and your PC/Mac for the first

time via USB you have to install the needed USB driver

(located at the provided DVD) on the computer.

HINT: If you are unsure about how to perform basic

computer operations appearing in this manual,

please refer to the owner‘s manual that came

with your PC/Mac.

CAUTION: Never attempt to play the enclosed DVD in

a conventional audio CD/DVD player, as

the resulting noise may damage your

speakers or your hearing.

1. You will be asked to connect the CMS to your PC

during the installation process, do not connect the

CMS before. Please cancel the Add Hardware

Wizard in Windows if it has already started.

2. Place the supplied DVD in your PC/Mac‘s drive.

3. Open the subdirectory, matching to the operating

system used, in the directory /Driver.

4. Execute the file „Setup.exe“ (PC) or

„Dynacord_USB-Audio_Driver.dmg“ (Mac) found in

the /CMS_600-3 directory. (Example: When using

Windows 32 Bit execute the file Setup.exe in direc-

tory /Driver/Windows/32Bit/CMS_600-3)

5. Select the language of the application.

6. Start installation of the USB driver for your opera-

ting system by clicking the corresponding button.

HINT: If you are not sure which Windows Operating

System is installed on your PC, click on Start >

Control Panel > System. In the„General“ tab the

Windows type is shown. For more information

read the documentation found in the directory

„Tips_Tricks“ at the supplied DVD.

7. Choose your language at the language selection

dialog and click the OK button.

8. Click on the „Install driver“ button.

9. Follow the on-screen instructions.

HINT: Check www.dynacord.com for USB driver

updates and additional information regularly.

4.2 Cubase LE

For using the CMS with your PC/Mac, the Cubase LE soft-

ware is included at the supplied DVD.

NSTALLATION

Execute following steps to install Cubase LE on your PC/

Mac.

1. Place the supplied DVD in your PC/Mac‘s drive.

2. Open the subdirectory, matching to the operating

system used, in the directory /Cubase.

3. Execute the file Setup.exe (Windows) or

Cubase_LE.mpkg (Mac) to start installation of the

software.

ONFIGURATION

For using your CMS in the Cubase software execute follo-

wing steps:

1. Start the Cubase LE software.

2. Select Devices > Configure Devices. The Configure

Devices dialog appears.

3. Select VST-Audiosystem in the left section of the

dialog.

4. Select the ASIO driver„ASIO for DYNACORD USB-

AUDIO“.

5. Press the OK button.

HINT: For more information about using the software

read the documentation found in the directory

„ApplicationNotes“ at the supplied DVD or

open menu Help > Documentation in Cubase LE.

Illustration 4-1: Configuration of Cubase LE

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

Comments to this Manuals

No comments

DYNACORD CMS 600-3 Owner's Manual Page 26

Comments to this Manuals